Fixed hand pallet truck platform safety inspection rules

Fixed lifting platform safety inspection rules
A range
1.1 This standard specifies the technical requirements for stationary lifting platform , inspection rules , test methods.
1.2 This standard applies to fixed installations in industrial production workshops , warehouses and other places , the vertical transport of goods to reach a certain height or fixed floor flat loading and unloading operations , and its lifting devices connected electric pallet jack by rigid member bench , lifting height of not more than 10 meters , speed not more than 0.3m / s, using power-driven lifting platform , and in the " special Equipment directory" ( national quality pot [ 2004 ] No. 31), the type of lift lifting platform types.
1.3 This standard does not apply to lifting equipment used in a closed elevator hoistway .
Inspection 1.4 mobile lifting platform can refer to this standard .
2 Normative references
The following documents contain provisions by the standard reference in the standard terms . For dated references , subsequent amendments ( excluding corrections) or revisions do Hand pallet jacks not apply to this standard, however, are encouraged to use the latest versions of these documents in accordance with the parties to reach an agreement on this standard . For undated references, the latest versions apply to this standard.
JB 5320-2000 scissor lift safety rules
JB / T 9229.2-1999 scissor lifts technical conditions
3 Terms and definitions
3.1 Fixed lifting platform fixed elevating platforms
Permanently installed in the specified location , and the lifting device is directly connected with the work surface or elevating work platforms connected by a rigid member, hereinafter referred to as the lifting platform .
3.2 workbench work bed
Elevating work platform components to accommodate or place items.
4 General requirements
In addition to the provisions of this part of the test methods and testing equipment , but allows the use of other advanced and reliable test methods and test equipment.
4.1 Test Power requirements :
Power equipment shall be consistent with the lifting platform designed power during the test. Supply voltage deviation is ± 5%, and rated frequency of the power frequency should be within the range