liftstar hand pallet truck Positioning the control valve

(1) is used to adjust the high quality requirements of important regulatory systems to improve the positioning precision and reliability of the control valve. 

(2) for a large pressure difference across the furniture movers‍ valve (△ p> 1MPa) occasions. Air pressure is increased by increasing the output power of the implementing agencies to overcome unbalanced force generated by the liquid on the spool, reduce stroke errors. 

(3) When the transfer medium to high temperature, high pressure, low temperature, toxic, flammable, explosive, in order to prevent external leakage, often very tight packing pressure, and therefore greater friction between stem and packing, this time Delays can be overcome with a locator. 

(4) is adjusted, or medium for the viscous fluid containing Post lift tables‍ suspended solids, can be overcome by the positioning of the media resistance to movement of the valve stem. 

(5) for large diameter (Dg> 100mm) regulating valve to increase the output thrust actuators. 

(6) when the distance regulator and the actuator when more than 60m, can be overcome by the positioning of the control signal transfer lag, the operation of the valve to improve the reaction rate. 

(7) used to improve the flow characteristics of the control valve. 

(8) a regulator to control the time division two actuators to implement process control, the two positioning devices are available, were treated with low and high input signal of the input signal, liftstar electric lift table‍ the lower the forward movement of an actuator, operation of the other elevation, which constitute the points Cheng regulation.

Electric hydraulic stacker

Crank aerial work platforms can be divided in accordance with electric lift table‍ wingspan crank arm and two more for shipyards and other highly demanding places, such machines security is better, easy to move, but the cost is high. Widely used in factories, automatic warehouses, parking lots, municipal, electric hydraulic stacker ‍railway stations, airports, theaters, exhibition halls, wharf, construction, renovation, logistics, power, transportation, petroleum, chemicals, hotels, stadiums, industrial and mining enterprises and other high-altitude operations and maintenance. The maintenance of equipment, paint decoration, exchange best choice for lighting, appliances, cleaning and maintenance and other purposes. Fixed lift table You can use design and manufacture according to individual needs. Fire widespread use of such lift.

Electric hydraulic stacker Fixed electric lift is a lift

Fixed electric lift is a lift, good stability, can not move can Post lift tables‍ only be fixed job, make aerial work a breeze. Mainly used for transporting goods between production lines height difference; the material line, assembly line; adjust the height of the workpiece workpiece assembly; height feeder feeding; large equipment assembly components when lifting; mainframe bed material, cutting; storage handling other places and forklift vehicles matching the rapid loading and unloading cargo. Depending on the requirements, you can configure attachment, any combination, security devices, such as fixed lift; electrical control; dynamic forms, etc.; work platforms form. The right choice for a variety of electric lift table‍ configurations, can maximize the lift function, to obtain the best results.

Air scissor lift lift

One kind of household folding lift, belongs to a lift, especially a furniture movers‍ household folding lift. Which consists of two steel plate beams, and which are connected by a plurality of inverted "U"-shaped soldering connecting card, a gap is formed intermediate, front and rear ends, respectively, disposed within the space formed in the track through the trolley back and forth may be connected to the hoist motor and . Thereby overcoming the irrational structure and inconvenient to use existing home lifts and other defects exist. With a reasonable structure, create a Post lift tables‍ simple, low cost, easy to use, practical, and can use more than one machine can also be single-family household use, etc.

liftstar hand pallet truck electric lift

With the development of social science and technology, electric lift has spread to all corners of the social life, the use of more and more widely, whether it is architecture, Electric lifters‍ civil engineering, and people's daily lives are inseparable from the electric lift machinery, many businesses seize this opportunity have invested in factories, electric lift machinery companies followed after rain shoots like everywhere in the major industrial cities, electric lift market is unusually hot, in short supply, it can be seen from the side, the rapid social development, promote the development of the whole industry as well as people's demand, however, as buyers lined company how to choose a good electric lift furniture movers‍ machinery goods become important topic.

Electric hydraulic stacker Electric Stacker

Electric Stacker is battery power as an energy source, counter balance stackers‍ electrical storage device as a power source. The main structures include: batteries, motors, hydraulic pumps, cylinders, piston rod, forks, chains, controller, etc. devices. Its main function is to raise the weights to the desired height. Generally used in warehouses, workshops and other material handling needs a place, with tray use, can greatly improve storage efficiency. So Electric Stacker has been called electric pallet stacker. Electric Stacker has been divided into two categories: Electric lifters‍ Full Electric Stacker and semi-electric stacker.

Air scissor lift Semi-electric stacker

Semi-electric stacker, electric stacker, full electric stacker, electric motor-powered, Hand stacker‍ battery for an industrial handling vehicles energy refers to a piece of cargo loading and unloading pallets, forklift, stacking and short distance wheeled transport vehicle transport operations. International Organization for Standardization ISO / TC110 called industrial vehicles. Electric Stacker include: full electric stacker, semi-electric stacker, Reach Stacker, Reach full electric stacker, Reach Stacker, pedestrian counterbalanced stacker. Electric Stacker widely used in factory workshops, warehouses, distribution centers and distribution centers, ports, railway stations, airports, freight yard, and access to the cabin, counter balance stackers‍ loading and unloading, cargo handling operations inside pallets and containers. Is a pallet transport, container transport essential equipment.

liftstar hand pallet truck Electric Stacker basic

Electric Stacker basic job function is divided into levels of handling, stacking / pickup, loading / unloading, sorting. Can initially be determined from the company's liftstar Electric lift‍ product range to be achieved according to business operations functions. In addition, special operations functions will affect Stacker specific configuration, such as the handling of a roll, iron, etc., need Stacker installation appurtenances to complete special features.

If companies need to transport goods or warehouse environment for environmental noise is required, select models and configurations should be considered in. If it is in cold storage or in environments with explosion-proof requirements, Stacker configuration should also be cold-type or explosion-proof. Process carefully examine Stacker job, the need to go through the place, imagine possible problems, such as high when the door out of storage any impact on Stacker; and out of elevators, lift height and impact on Stacker bearer; when working upstairs, Hand stacker‍ the floor bearing whether the corresponding requirements, and finally considering all factors determine the final electric stacker models and technical parameters.

liftstar hand pallet truck Forklift plays

Forklift plays a very important role in the enterprise's logistics system, is the Air lift table‍ main force of material handling equipment. Widely used in various sectors of the national economy in railway stations, ports, airports, factories, warehouses and so on. During World War II, forklifts develop. China from the early 1950s began manufacturing forklifts. Especially with the rapid development of China's economy, most enterprises have been away from the original material handling manual handling, forklift instead is mainly mechanized handling. Thus, in the past few years, the demand for Chinese forklift market are double-digit annual growth rate. 

Truck on the market to choose from many brands, electric lift table‍ models of complex, coupled with strong technology and the product itself is very professional, so the choice of models, vendor selection is a lot of optional enterprises often face.

Electric hydraulic stacker Electric Stacker

‍Electric Stacker is battery power as an energy source, Mobile Carrier‍ electrical storage device as a power source. The main structures include: batteries, motors, hydraulic pumps, electric hydraulic stacker ‍‍‍, piston rod, forks, chains, controller, etc. devices. Its main function is to raise the weights to the desired height. Generally used in warehouses, workshops and other material handling needs a place, with tray use, can greatly improve storage Electric order picker‍ efficiency. So Electric Stacker has been called electric pallet stacker. Electric Stacker has been divided into two categories: Full Electric Stacker and semi-electric stacker.‍

Air scissor lift Electric Pallet Truck Product Features

1, using an electric hydraulic Fixed lift table‍ pump lift, using electronic control (chopper) or electrically controlled resistive made ​​traveling speed of adjustment.
2, there is a pedal and a variety of specifications without a pedal.
3, driving motor installation methods are two kinds of vertical and horizontal motor.
4, with respect to imports of forklift jacks‍ electric cars, domestic electric cars generally do not have power steering system. Most imported electric cars have been installed power steering system.
5, electric cars suitable for heavy and long cargo transport can greatly improve the efficiency of cargo handling.
‍6, the machine is ultra-thin body design, CVT, especially small turning radius, body strong, light and flexible action, no noise, no pollution, long working hours on a single furniture movers‍ charge, reliable, widely used in logistics, warehouse, factory , hospitals, schools, shopping malls, airports, stadiums, railway stations airports and so on.‍

hand pallet truck

‍The difference between the all-electric cars and hand pallet trucks are:
The first is the difference between Air lift table‍ the power systems: hand pallet trucks are transporting goods by human lifting hand pallet truck‍, all electric cars as the name suggests power system is overweight by motor power handling;
Followed by driving the different technical requirements: hand pallet trucks can operate basically the general staff. All-electric cars was equipped with professional drivers;
Once again, different performance and price: electric stacker‍ high performance all-electric cars on efficiency, operational flexibility, handling speed. All-electric cars is much higher than the price of hand pallet trucks.‍

Electric hydraulic stacker Hand pallet truck

Hand pallet truck configurations in accordance liftstar electric lifts‍ with their appearance can be divided into hand pallet trucks, high lift scissor truck scales and electronic transport vehicles. Hand Pallet Truck has a large carrying capacity, is one of the heavy lifting for a short distance Self propelled pallet jack‍ tool is the ability to drive the hydraulic system to achieve cargo lifting and lowering, pulling completed by human handling operations.‍

Air scissor lift Hand pallet trucks

Hand pallet trucks and electric pallet trucks are flat point-handling tools. Compact size and flexible so that hand pallet trucks suitable for almost any occasion. furniture movers‍ However, due to the manual operation air scissor lift‍, when carrying heavy items around two tons more difficult, it is usually for a short distance of about 15 meters frequent operations, especially in loading and unloading area. In the future all aspects of logistics, the manual pallet trucks also will assume the role of convergence between the various transport links, a set on each truck is equipped with a card or hand pallet trucks, will make quicker and more convenient loading and unloading operations, and does not subject to site constraints. When the plane carrying about 30 meters away when the EU's special forces electric forklift electric pallet truck is undoubtedly the best choice, traveling through the infinitely variable speed control switch on the handle, follow the walking pace of the operator, reducing personnel fatigue while ensuring the safety of the operation. Such as major transport routes at the distance Electric Hand Pallet Jacks‍ of about 30 meters to 70 meters or more, you can use electric pallet truck with folding pedal, the driver standing driving, maximum speed can be increased by nearly 60%.‍

hand pallet truck

AGV (automated guided vehicle, referred to as the AGV), Post lift tables‍ for industrial applications without a truck driver to be charged the battery for its power source. Usually can be controlled through a computer and its path of travel behavior hand pallet truck‍, or the use of electromagnetic rail (electromagnetic path-following system) to set up their travel routes, electromagnetic rail adhesive on the floor, AGV then follow the track brought electromagnetic message to move with the action.
In addition, such as: hydraulic support van (split into one of the cars and trucks, split hydraulic support vehicles, also known as trailer truck)
Hydraulic support truck: mining equipment, hydraulic support specifically for mining, mining and other large machinery and handling difficult design a special removal tool, use it not only Quick lift Hand Pallet Truck‍ to improve labor efficiency, and achieve a safe move, especially in the working face layout and mining face when moving, reflects its economy and convenience features.‍

Electric hydraulic stacker Van English name: Pallet Truck

Van (English name: Pallet Truck) that plays the role of logistics handling cargo handling equipment. Hand pallet truck in the use of its bearer pallet fork insertion hole Electric store Positioner‍ hydraulic system driven by the ability to achieve pallet lifting and lowering, pulling completed by human handling operations. It is the most convenient means of transport tray, the most effective, the most common loading and unloading, handling tools.‍

Electric hydraulic stacker Forklift Trucks

A diesel engine as power, load capacity from 10.0 to 52.0 tons, generally used for heavier cargo terminals, steel and other industries outdoor jobs.
③ container Support leg‍ forklift
A diesel engine as power, load capacity from 8.0 to 45.0 tons, is generally divided into empty container forklift, heavy container forklift and reachstacker. Used in container handling, such as container yard or port terminal operations.
④ side of the truck
A diesel engine as power, load Electric hydraulic stacker‍ capacity of 3.0 to 6.0 tons. Without turning, with the ability to take the goods directly from the side of the fork, and therefore mainly used to take long fork type of goods, such as wood, steel and so on.‍

Air scissor lift Forklifts

Forklifts can usually be divided into three categories: internal combustion forklifts, electric forklifts and warehouse trucks.
Internal combustion forklift is Air scissor lift‍ divided into ordinary internal combustion forklifts, heavy trucks, container trucks and side forklift air scissor lift‍.
① ordinary internal combustion forklifts
‍Generally use diesel, gasoline, liquefied petroleum gas or natural gas engines as power, load capacity 1.2 ~ 8.0 tons, the operating channel width is generally 3.5 to 5.0 m, taking into account the emissions and noise problems, usually outdoors, shop or other right exhaust emissions and noise do not Fixed lift table‍ require special place. Because fuel added convenience, so you can achieve long continuous operation, but also capable of performing (such as rain) to work in harsh environments. ‍

liftstar hand pallet truck Scissor Lift

Scissor Lift divided into large scissors (Combo), small scissors (single shear) Lift, Slim Series lift, small scissors lift is mainly used in automotive repair and maintenance liftstar hand pallet trucks‍ convenience, safety, operation . After Trench level with the ground. Pouring more large scissors lift, wheel alignment is with the best equipment, and can be used as car repair, tires, chassis overhaul with. Trench can also be mounted directly on the ground.
Slim Series Scissor Lift without trenching, applies to any repair shop, there are not suitable for installation on the floor two post lift as well as ordinary poster lift, but the machine in contact with the floor wide, so you can install the You can drive any floor above, resolve customer site problems. Such a machine is the future mainstream products, foreign large-scale use of this class of products. ‍
Picture Scissor Lift: a beautiful model, double hidden structure, superior synchronization performance. 2 levels of precision adjustable, suitable for a variety of high-precision wheel alignment. 3 easy tire removal and chassis overhaul. 4 wheel turntable (optional accessory) position adjustable, extended rear wheel skateboard. 5 pneumatic double teeth self-locking insurance explosive devices and anti-pipe, down automatically open, electric platform stacker‍ free fuel ultra-resistant materials slider. 6 imported hydraulic, pneumatic and electrical components, stable and reliable equipment operation.‍

while not suitable for relatively high strength requirements places

while not suitable for relatively high strength requirements places, such as a lot of need in a hurry loading unloading areas. The Electric Stacker efficiency is more than five times the manual stacker, <a href="http://www.lift-star.com/key-manual-drum-stacker-3/">Manual drum Stacker</a>  Electric hydraulic stacker  and easy operation, the operator only rarely labor intensity. Station Rack Electric Stacker only need to stand driving, lifting a finger pressing the button control, very easy.  <a href="http://www.lift-star.com/hand-pallet-trucks/">liftstar hand pallet jacks</a>  So this basically unlimited manpower, the biggest limitation is its battery capacity problem. Currently ordinary full electric stacker continuous working time is about 3-6 hours, depending on the specifications of different models of forklift trucks may be! In general, the larger the battery capacity, longer battery life.

Small Scissor Lift is designed for quick

Small Scissor Lift is designed for quick and fast repair car repair plant
designed beauty department,Air scissor lift Tibetan-style design does not take up space usage Large shear liftstar power pallet jacks  plate lift: 1, luxury wide flat scissor structure,
synchronization performance is superior. 2, adjustable fully meet the four levels of precision positioning requirements. 3, hydraulic, electrical and pneumatic components, stable and Mobile Carrier  reliable equipment operation. 4, pneumatic double teeth self-locking insurance and anti-explosion structure tube, down automatically open, to ensure safety. 5, cleverly unique sliding system, the platform is compact, but also do not dig pits. 6, with a secondary trolley rails, optional secondary lifting trolley. 7, the front wheel turntable (optional) position is adjustable, for a variety of models.

Modern society lift a wide range of products

Modern society lift a wide range of products, there are a number of different classification criteria. Social  liftstar electric stacker production equipment commonly used in several types of look.
According to lift the structure can be divided into: scissor lift, rail lifting platform, aluminum lift, liftstar hand pallet jacks  lift cylinder sleeve, folding arm aerial vehicles, crank-style aerial vehicles.
According to the lift moves can be divided into: fixed lifts, mobile lifts, self-propelled lifts, vehicle lifts.

Combined with a forklift on the basis of the characteristics

Combined with a forklift on the basis of the characteristics of the bridge crane developed an automated machine-style pileup in the car hanging down from the crane can lift a rigid column has a fork, Electric hydraulic stacker the column can be rotated about a  liftstar electric reach stackers  vertical centerline, so when the roadway width ratio forklift jobs require little room shelves need. This crane is supported on both sides of the elevated rail operation, in addition to general cargo unit can be transported long heap objects. From the time span of less weight and can also be hung on the roof below orbit, then it's lifting trolley can transition  liftstar pallet stackers  to another neighbor across the stacker crane hanging. Column can be a single or multi-section telescopic. Single-column structure is simple, light, but not across the cargo stack and other obstacles, mainly applicable to warehouse shelves. Multi-section telescopic sections are generally two to four columns, across goods pile, it can also be used to direct the stacking unit loads into a pile of non-rack warehouse. Cranes can be controlled on the ground, but also together with the lifting forks cab control. Nominal weight is generally 0.5 to 5 tons, some up to 20 tons, mainly for the height of 12 meters or less, the span of less than 20 meters in the warehouse.

Sets of cylinder-type electric lift for the multi-stage hydraulic cylinders upright rise

Sets of cylinder-type electric lift for the multi-stage hydraulic cylinders
upright rise, materials and liftstar hand pallet truck good mechanical properties of high strength hydraulic liftstar electric pallet jack  cylinder, pyramid ladder cradle that lifts higher stability. Even living 20 meters altitude, it can feel its superior smooth performance. Features: Set cylinder electric lift for multi-stage hydraulic cylinders upright rise, materials and good mechanical properties of high strength hydraulic cylinder, pyramid ladder cradle that lifts higher stability. Even living 20 meters altitude  liftstar hand pallet jacks  it can feel its superior smooth performance. The new design, double ladder anti-rotation structure, two-speed drop system, the biggest rise 35 meters, stable, reliable, beautiful, easy to operate is the biggest characteristic sets of cylinder electric lift. Optional Power: AC 220V (standard configuration), AC 380V power supply, DC power supply, manual pump.

Select Electric Stacker according to job function

Select Electric Stacker according to job function
Stacker basic job function is divided into levels of handling, stacking / pickup, loading / unloading, sorting. Can initially be determined from the company's product line from the electric platform stacker company's business to be achieved in accordance with the job function. In addition, special operations functions will affect Stacker specific configuration, such as the handling of a roll, iron, etc., need Stacker installation appurtenances to complete special features.
 So using manual stacker is not suitable for places with large workload; while not suitable for  liftstar electric pallet truck   relatively high strength requirements places, such as a lot of need in a hurry loading unloading areas. The Electric Stacker efficiency is more than five times the manual stacker, and easy operation, the operator only rarely labor intensity. Station Rack Electric Stacker only need to stand driving, lifting a finger pressing the button control, very easy. So this basically unlimited manpower, the biggest limitation is its battery capacity problem.

the following are the details related news domestic and imported chain hoist slightly superior potential contrast.

Is a professional chain hoists, lever hoists, cranes and other lifting equipment line tackle manufacturers, the following are the details related news domestic and imported chain hoist slightly superior potential contrast.

Domestic brands are dual chain hoists chain hoists birds, hand chain hoists, chain hoists Dove martial arts, and black bears in Taiwan Kawasaki chain hoists, chain pallet stackers ‍ that several more famous in the country. The biggest advantage is that the domestic chain hoists practicability. A more reasonable price. Main models  type explosion-proof chain hoists several models. Is also very popular in the country several. I believe you will understand them.

The main imports from Japan chain hoists chain hoists, chain hoists Germany Yale chain hoists, chain hoists American Amy Dayton, electric stacker‍ and other major brands. Import chain hoists biggest advantage is that more advanced technology and design, the use of better quality parts, but higher prices.

Good domestic brand chain hoists, chain hoists imported brands worth mentioning. Different brands of chain hoists have their own unique advantages. No matter what you've used, as long as the product itself can play advantage, it is worth buying.

Air scissor lift the pressure relief valve to adjust the maximum rating

Hand pallet trucks fuel tank leak will cause the hydraulic cylinder does not rise up . For the following reasons :
the pressure is low , less than load. Check the pressure relief valve .
tanks into the air , will cause instability in the cylinder , the air should be excluded .cylinder relief valve into the dirt , then place in a normally open state of the valve , automatic oil back into the tank , no oil flowing into the fuel tank .the piston side in electric stacker contact with the cylinder head too tight will cause oil pressure get in, can not produce Air scissor lift  enough thrust to make cylinder operation.hand pallet trucks load is too large , the pressure relief valve to adjust the maximum rating, but not force continuous action of the cylinder .leak causes: hydraulic forklift cylinder and piston wear and the gap is too large, if the electric pallet trucks piston seals installed , it is because of wear or aging lost ring seal . Solution: Replace the Air scissor lift piston or replace seals.
if the electric truck tanks often use only a part of the local wear serious gap increases, the cylinder leakage. The workaround is heavy with the Pistons. The reason for this phenomenon is the rod seal too tight , the rod is longer, in part caused by sliding too much pressure , or sliding parts cylinder contamination .

relatively complete industrial categories

 stressed Wafangdian in Liaoning coastal economic zone are to seize the development of open and Dalian global urbanization strategic opportunities, and vigorously promote ctric pallet jack‍ coastal development, vigorously develop strategic emerging industries, to enhance urban functions, improve people's livelihood well-being, for the "second five "to achieve a new leap in scientific development and lay a solid foundation, built in the Bohai Sea region will Wafangdian competitive emerging modern industrial city.

50 selected Chinese bearing industry

Wafangdian City because production layout is serial oled display‍ reasonable, relatively complete industrial categories, medium and small enterprises coexist, established a relatively complete industrial system bearings, Wafangdian City, was awarded the "China Bearing" title National Machinery Industry Federation, and its bearing industry selected the "Top 50 Chinese industrial clusters."

motor-driven warehouse Electric hydraulic stacker need to have a spare battery.

Electric Forklift
With motor-powered, battery energy. 1.0 to 4.8 tons carrying capacity, operating channel width is generally 3.5 to 5.0 m. Since there is no pollution, low noise, it is widely used in demanding environmental conditions, such as medicine, food and other industries. Since each Electric hydraulic stacker cell is generally about eight hours after the work electric lifts needs to be charged, so for multi-shift working condition with battery backup.warehouse forklift
Warehouse Forklift mainly for cargo handling and warehouse forklift design. Apart from a few warehouse forklift (such as hand pallet truck) is the use of human-driven, others are driven by a motor, because the body is compact, mobile and flexible, light weight and good Hand lifter environmental performance while in storage industry has been widely used. When multi-shift operations, motor-driven warehouse forklift need to have a spare battery. Electric Pallet Trucks
1.6 to 3.0 tons carrying Air scissor lift capacity, operating channel width is generally 2.3 to 2.8 meters, fork lift height is generally about 210mm, mainly used for horizontal transport and cargo handling within the warehouse. Generally have walk-in and stand-two modes of operation, according to the efficiency requirements choice.

The Air scissor lift valve is a valve shaft movement guide section

the two gate valve sub intake valve and exhaust, its role is to open and close the intake and exhaust channel, which consists of a header portion and the rod components. A head for opening and closing the intake and exhaust passage, the valve stem portion is used to guide the movement. Ordinary alloy steel intake valves, exhaust valves are made ​​of heat-resistant alloy, because the exhaust valve head in direct contact with the combustion gases, heat seriously.
In order to ensure the use of the scissor pallet truck valve head and valve seat close fit between the tapered joints and thermal conductivity, valve head and valve seat, and by grinding. The angle between the cone and the top plane is called the taper angle of the valve, the valve cone angle of the commonly used 30 ° and 45 °. The valve is a valve shaft movement guide section. Common valve shaft with the rear cut grooves for the installation of the conical locking tabs.
Valve seat: the cylinder valve seat is on the (side-mounted valve) or cover (overhead valve), the direct electric pallet jack processing of the circular seat hole, play with it and the valve seal. Some wear-resistant alloy cast iron valve seats available for processing into the seat, mounted on the cylinder block or cylinder head.
Valve guide: its role is to guide the valve for proper axial movement, while the heat will be transmitted to the valve stem portion of indirect water jacket. To facilitate repair, replacement, valve guides made ​​separately and then pressed into the cylinder block (or cylinder head). When the valve guides pressed into the cylinder block (or cylinder head), there should be a certain amount of interference and indentation depth, in order to ensure good heat transfer.
Valve spring: its role is to ensure the valve and valve seat seal, and to mitigate and overcome the inertia forces the valve and other transmission parts produced, to prevent damage to normal working gas distribution agencies.

Counterbalanced forklift trucks moving back and forth in order to rely on the fork unloading cargo.

Counterbalanced forklift trucks are the most widely used form of construction, accounting for over 80% of the total forklift. It is characterized by the fork extends in front of the body electric pallet jack outside the contour of the wheel center of gravity of the goods fall. In order to balance the weight of the goods produced by the overturning moment, maintaining longitudinal stability forklift in the body with a balanced amount of the tail. Counterbalanced forklift trucks moving back and forth in order to rely on the fork unloading cargo.
Straddle truck, which features a leg in front of the truck along with a small wheel can be inserted into the cargo powered pallet trucks pallet fork and fork, and then upgrade the goods by the forks. As the center power pallet jacks of gravity of goods within the base area surrounded by front and rear wheels, the truck's stability. Generally use batteries for energy, from the weight of the 2T less. Straddle more than counterbalanced forklift trucks simple structure, small weight and dimensions, fit in narrow passages and interior stacking, handling, but the low speed, small-diameter wheel walking on the ground demanding.

Air scissor lift we know that it is mainly used for goods piled high work

Speaking of the functional role of such a powerful electric forklift trucks then for its function, it in turn can be used to determine which areas of it? This is not just a user needs to know, but also a buyer should know, after all built on the basis of knowledge or understanding can bring more benefits to us.
The first is a warehouse, in Air scissor lift order to achieve efficient use of warehouse space, our most basic hand stacker need items are stacked together, but the distance is too high, and the height of merely relying on artificially forces still can not be achieved, so we need is an electric forklift trucks to complete this work.
Followed in the workshop, the workshop of the goods piled also has certain requirements, so in fact it will be like the same demand in the warehouse, so at this time the hand pallet truck use of electric forklift trucks are also able to play a very active role in .
Electric Stacker from the point of view of applications, we know that it is mainly used for goods piled high work, but it can still play a very active role in the respective fields, so its use is also to It brings a lot of positive role.

Below small answer you. An ordinary battery

Currently on the market used electric forklift battery is divided into three categories, ordinary batteries, dry charged batteries and maintenance-free batteries, then three batteries were what characteristic? Below small answer you.
An ordinary battery
Standard battery forklift is composed of lead plates and lead oxide, the electrolyte is an aqueous electric pallet jack solution of sulfuric acid. Its main advantage is that the voltage stability, cheap; drawback is the low specific energy (ie energy per kilogram of battery storage), life is short and routine maintenance frequently.
2, dry-charged battery
Its full name is dry charged lead-acid battery, its main feature is the negative plate has a higher storage ability, in a completely dry state, the resulting electricity can be saved in two years, when used, simply add the electrolysis fluid, etc. can be used over 20-30 minutes.
2, maintenance-free batteries
Maintenance-free batteries Counter-balance Stacker due to their advantages of structural electrolyte
consumption is very small, in the life of the basic need to add distilled water. It also has shock, high temperature, small size, low self-discharge characteristics. Battery life is generally twice the ordinary. Maintenance-free batteries on the market, there are two: the first one at the time of purchase disposable after use, do not need to add electrolyte maintenance (adding replenisher); another factory when the battery itself has added a good electrolyte and sealed users simply can not add supplementary liquid.

the structure of the ministries hand pallet truck should be checked before use is normal

1, should be based on different environments, use different operating oil. When the ambient temperature is -5 ~ +45' C, please use the mirror synthetic oil, add the oil must be clean, so as not to affect the normal operation of the hydraulic system.

2, the structure of the ministries hand pallet truck should be checked before use is normal, all joints is loose.

3, the goods should be uniformly hand pallet truck distributed in the surface of the fork not tilt or a single crossed up, after the accident to prevent tipping or goods damaged parts.

4, after the operation, should be post lifter unloaded and placed in a low position of the car, will not allow heavy objects on a long fork.

5, during transport van, probably due to inversion causes the hydraulic system into the air, resulting in a slow hand pallet truck  rod or pressure is less than the job requirements. Under no circumstances should the load, put the car in a low position, but pulled grapple, reciprocating several times to return to normal.

Electricity needed to charge the battery Scissor Pallet Truck

Electric forklift battery directly affects the efficiency of electric forklifts, electric forklifts and therefore must be time to buy a good selection of batteries, battery pallet stackers  factors then what does?
1, Energy
Electricity needed to charge the battery, accounting for 13% of total lifetime costs.
2, the device
Including rack systems, battery charging device, charger wall bracket, cleaning station, environmental protection Scissor Pallet Truck equipment, accounting for about 1% of the total lifetime cost.
3, the battery
Initial acquisition cost of hand pallet truck batteries, accounting for 13% of the total battery life costs.
4, battery management labor
Watch battery is fully charged after fill electrolyte, charge the battery, keep the battery clean and prevent corrosion of the battery needs to labor costs, about 60% of the total life of the station.

hand pallet truck then it is in addition to lifting weights, it'll also have other uses it

Details of a professional chain hoists, lever hoists, cranes and other lifting equipment line tackle manufacturers, the following is news in the mine shaft sinking down the chain of effects.
In general, in life or works down the chain are often used to lift heavy objects, both time-saving and easy to powered pallet truck carry. Little down chain on many occasions allow us to achieve the best of both worlds, then it is in addition to lifting weights, it'll also have other uses it?
In the mine shaft sinking work, we may encounter situations ground sinking vehicle stability is not enough, then, chain hoists can show their talents. First, you need a temporary stable pallet stacker ground vehicles, the two stable hanging onto the rope sheave derrick platform, two stable ground end of the rope rope, hoist temporarily fixed on the ground to fight through two 5t anchor chain, steady rope needed tension to be adjusted by hand chain hoist, so that both the production and the urgency of the solution, but also saves a lot of manpower and material resources.
Such methods may we rarely heard the heavy lifting down the chain to put aside the primary purpose, which would be a novel usage. It may just be one of them, perhaps through your own research to make it advantage to get more play and use.

Air scissor lift Residential entrance room floor should be higher than the outdoor terrace of not less than 0.1m.

1 Huoti clear width of not less than 1.1m. 6 layers and 6 layers below the side railings may be less than 1m ( benches clear width refers to the horizontal distance from the wall handrail centerline ) .
2 freight elevators stepping width of not less than 0.26m, height not greater than 0.175m. Armrest height of not less than 0.9m. Horizontal section of the railing when cargo lifter length electric pallet jack greater than 0.5m, armrest height should not be less than 1.05m. Freight elevator railing between the vertical bars clearance powered pallet truck should not exceed 0.1lm. When the Air scissor lift freight elevator shaft clear width greater than 0.11m, measures must be taken to prevent children climbing slippery .
3 freight elevator platform ladder Air scissor lift  clear width of not less than clear width and shall not be less than 1.2m. Freight movements under the vertical height of the platform edge to electric pallet jack humans walkway structure should not be less than 2m. Residential entrance room floor should be higher than the outdoor terrace of not less than 0.1m.
4.7 layer and 7 layer above the highest residential or household demographic floor at the bottom of the indoor 16m above ground level must be set residential elevator . When the intermediate layer has a direct access to the outdoor outlet when counting the number of layers in the layer . When the top of the thermocline layer count as one .
5.12 level and 12 residential floors above should be located not less than two elevators , one of which should be to accommodate a stretcher lift.
6 high-rise residential elevator station should be located on each floor . Non- each station , the station does not exceed two layers . Corridor tower and high-rise residential elevator group should focus on layout. Each modular unit high-rise residential elevators should be used only to set up a contact Gallery Unicom .

liftstar Air scissor lift For large area and horizontal transport mainly occasions

for small footprint  or high shelves, with vertical stacker or electric forklift handling mainly the occasion, single-sided and double-sided shelves series tray tray shelves can be selected.

If the load on the shelves of a library or stereo 1T, but no plank shelves, steel shelves with built recommend tray. Steel structure built of steel pallet shelf load effectively solve the greater electric stacker the greater the weight of the product, the old problem of the high cost, the more important is the use of a wall thickness of about 2mm square steel rigidity reaches the upper shelf  are horizontal and vertical deflection ≤ 10mm stringent requirements, while reducing permanent deformation, and reduce costs.

For large area and horizontal Hand fixed lift table transport mainly occasions, if using manual hydraulic pallet trucks carrying the appropriate choice of single tray. For stacking the goods to the goods below at the bottom of the tray coincides with the end of the swastika sided tray or tray-type single well. If using a self-propelled motorized pallet trucks are suitable for handling not connected with the bottom of the foot of the nine-sided tray

For low viscosity hand pallet truck oil directly into a clean

The quality of hydraulic oil, directly affect the normal operation of the hydraulic cylinder truck, the following is a simple identification of impurities in the hydraulic oil Method:

1, sensory identification: a clear fluid metal particles in suspension, directly feel the presence of small particles when pinched with fingers twist; in the light, if reflective flash point, then the hydraulic components have been badly worn; If the hand pallet truck tank There are a lot of metal shavings bottom of precipitation, then the main pump or motor has been badly worn?

2, heating Identification: For low viscosity hydraulic oil directly into a clean, dry test tube heating tube heating Semi Electric Stackers oil if found to precipitate or suspended solids, then the oil already contains mechanical impurities???

3, the filter identification: For high viscosity hydraulic oil, diluted available pure gasoline, then clean filter paper retained if found a large number of mechanical impurities (metal powder) on filter paper, then the hydraulic components have been badly worn??

4, the sound identification: If the entire hydraulic system has a larger intermittent noise and vibration, while the main pump "buzzing" sound, even rod "crawling" phenomenon, then the hydraulic hand truck observed liquid fuel tank, fuel lines? export or transparent level gauge, you will find a lot of foam? This shows the hydraulic oil has been immersed in a lot of air?

5, the application Ferrography identification: Ferrography mechanical friction wear is Vice basic starting point, by means of iron spectrometer separates the hydraulic oil in the wear particles and other particles out and made of iron spectrum slices, then placed observed under a microscope or scanning electron microscope.

hand pallet truck loading height shall not obstruct the driver's line of sight

1, manual forklift fork carrier when the goods shall be required to adjust the distance between the two forks so electric pallet jack that both forks load balancing not skewed, the goods shall be affixed by the backrest side, the weight of the fork carrier shall comply with the load center of the curve signs regulations.

2, loading height shall not obstruct the driver's line of sight.

3, during the process of loading and unloading cargo, you must use the brake forklift.

4, when the fork close to or withdrawal of the goods, the speed should be slow and steady, do not pay attention to the wheels rolling cargo, wood pad, to avoid being compacted matter overfly wounding.

5, with the goods when the goods cross on to take the fork should be as deep as possible into the fork load manual Platform Stackers following, but also pay attention to the fork or sharp objects can not be met other goods. After the minimum should be used to stabilize the mast tilting loads to avoid load sliding backwards. When lowering the load, make a small mast forward, in order to load and extract the fork placed.

6, prohibited goods and fork to take the high-speed collision with a fork head with a hard object.

7, forklift operation, prohibited personnel standing on the forks.

8, when the forklift fork to take the goods, prohibited personnel standing around the fork to avoid collapse of the goods wounding.

9, prohibit the use of fork lift personnel engaged in high places, in order to avoid falling from height accident.

10, are not allowed at the pier on the shores of the goods shipped directly to the fork.

11, prohibit the use of single fork operation.

Stacker drive wheel drive motor speed significantly reduced or severe overload Cause

The battery voltage is too low or too big pile head contact resistance; between the motor commutator segments coke cause a short circuit between the chip; motor improperly adjusted brakes with brake leaving the motor running; drive head gear boxes and bearings lack of lubrication or chassis card motor armature short circuit; resistance.
Solution: Check the battery terminal voltage Stacker load or cleaning trailer coupling; clean up the commutator; adjust the brake clearance; checking cleaning and re-filling oil, remove Electric Hand Pallet Jacks jamming phenomenon; replace the new motor.Stacker crane lifting weakness or not
Reason: Gear pumps and pump mention excessive wear; improper high-pressure relief valve inside; oil pipeline spill; hydraulic oil temperature over; mast carriage
jamming phenomenon exists; pump motor speed is too low.
Solution: Replace worn or gear pump; readjust; inspection and repair; replace defective hydraulic oil and drum trucks the oil temperature rise causes; Check and adjust; Check the motor and troubleshooting.
piled high door frame automatically tilt difficulties or action not smooth
Cause: The tilt cylinder wall and seals for excessive wear; within the valve stem spring failure; piston rod stuck in the cylinder wall or bent; within the tilt cylinder seals fouling too much or too compressed.
Solution: Replace the O-rings or cylinders; replace qualified spring; replace damaged parts; cleaning adjustments.

lectric hand pallet truck battery daily maintenance points

1, the battery should always restocking distilled water ( pure water ) .

2 , long-term use of electric forklifts fully charged battery should be shelved . Frequency and kept apart by about 1 to 2 months for charging .

3 , in the multi-shift operation , the motor -driven warehouse forklift need a spare battery ( the case of continuous operation , fast battery power consumption , wear and tear on the battery is relatively large ) .

4 , when the battery charge , the scissor pallet truck charge must be completely out of the loop with the chopper , because in addition to the impact charger charging , the charger will damage arising from over-voltage chopper .

5, the battery should not be placed horizontally . Since the internal battery is generally 22 to 28% sulfuric acid . When the batteries are placed and the electrolyte plates can be overwhelmed pallet jack if a little space is left horizontally , then the battery will be part of the electrode plate exposed to the air , which is very detrimental to the battery plates , the battery and the general observation hole or top of the battery has vent with the outside world , so it is easy flowing electrolyte battery horizontally .

6 , choose smart phased charger to prevent overcharging leads to dehydration.

7 , choose a high efficiency electric wheel hub system to reduce the operating current.

8 , Qin charge or maintain a reasonable charging frequency , it is best to do a planned charging. If one day or two days for a full charge .

9 , to prevent the loss of electricity storage, loss of electricity stored in the battery of the most harmful

Air scissor lift different models in different market holdings

If the truck in the warehouse operations, different models in different channel width required to enhance the ability to have differences , which will bring about changes in the layout of the warehouse , such as cargo storage volume changes.
models and the number of changes , fleet management and other aspects will have an impact .
different models in different market holdings , its after-sales support capabilities are different, for example : low driving three high stacking forklift driver and three belong to the narrow channel stacking forklift truck series , can be in a very narrow Hand pallet jacks channel ( 1.5 ~ 2.0 m ) to complete palletizing , pick up . But the former can not raise the cab , so poor operating perspective, the lower the efficiency . Since the latter can be completely covered by the former features, and performance is more superior, and therefore beyond 4 to 5 times the sales in the European market, the latter than the former , in China reached more than 6 times . Therefore, most of the suppliers are focused to develop three shop cranes high stacking forklift driver , while the low three- stacking forklift driver is only used in small -tonnage , low lift height ( generally less than 6 meters ) of operating conditions . In the small market sales , the number of its service engineers , engineers experience, service capabilities , such as parts inventory levels will be relatively weak.

After a comprehensive assessment of the impact to the above aspects , choose the most reasonable option.

hand pallet truck automobile and defense industries

Domestic electric forklift trucks brands are widely used in various fields of geological exploration , stone , machinery, automobile and defense industries , the level of the manufacturing process used for abrasive machining , geology drill and stone sawing brand has been great progress.
Also need to increase brand of pallet jack industrial investment, pay close attention to the new electric stacker development and new technologies, the promotion of new technology , continue to broaden the application areas of diamond , diamond brand of industrial progress overall technological level and market competitiveness , variety , quality and survival , technology and development to improve .
  Experts point out that although China produces various diamond brand are widely used in various industries , and electric stackers achieved significant economic benefits, but its technical level with similar foreign Electric Stacker match there is a gap , the full development of electric forklift trucks brands industry, pay close attention to the new electric forklift trucks, the development of new technology , accelerate the development of China's electric forklift trucks brand industry, economic progress and overall technical level .

Fixed hand pallet truck platform safety inspection rules

Fixed lifting platform safety inspection rules
A range
1.1 This standard specifies the technical requirements for stationary lifting platform , inspection rules , test methods.
1.2 This standard applies to fixed installations in industrial production workshops , warehouses and other places , the vertical transport of goods to reach a certain height or fixed floor flat loading and unloading operations , and its lifting devices connected electric pallet jack by rigid member bench , lifting height of not more than 10 meters , speed not more than 0.3m / s, using power-driven lifting platform , and in the " special Equipment directory" ( national quality pot [ 2004 ] No. 31), the type of lift lifting platform types.
1.3 This standard does not apply to lifting equipment used in a closed elevator hoistway .
Inspection 1.4 mobile lifting platform can refer to this standard .
2 Normative references
The following documents contain provisions by the standard reference in the standard terms . For dated references , subsequent amendments ( excluding corrections) or revisions do Hand pallet jacks not apply to this standard, however, are encouraged to use the latest versions of these documents in accordance with the parties to reach an agreement on this standard . For undated references, the latest versions apply to this standard.
JB 5320-2000 scissor lift safety rules
JB / T 9229.2-1999 scissor lifts technical conditions
3 Terms and definitions
3.1 Fixed lifting platform fixed elevating platforms
Permanently installed in the specified location , and the lifting device is directly connected with the work surface or elevating work platforms connected by a rigid member, hereinafter referred to as the lifting platform .
3.2 workbench work bed
Elevating work platform components to accommodate or place items.
4 General requirements
In addition to the provisions of this part of the test methods and testing equipment , but allows the use of other advanced and reliable test methods and test equipment.
4.1 Test Power requirements :
Power equipment shall be consistent with the lifting platform designed power during the test. Supply voltage deviation is ± 5%, and rated frequency of the power frequency should be within the range

Air scissor lift to prevent misuse and strict temperance after handling.first leg down

the operator to concentrate , to prevent misuse and strict temperance after handling.first leg down , if necessary, in charge of decentralization wooden leg pad , make sure the vehicle is level. when the operating handle to steady , not rapid rapidly, this may cause the operating arm swing inertia is too large and accidents .
must be strictly in accordance with the technical and operational requirements of the operating range of the device . the staff operating the bucket ( platform) to wear seatbelts .
lifting operations bucket ( platform ) , the upper and lower arms should alternate action to ensure that the job hopper ( platform ) in the best state radius increases , the operating arm is prohibited for other purposes .
the job , the operator should pay pallet stackers attention to the bucket ( platform ) , a safe distance from the arm with high and low voltage wires , telephone lines and buildings , trees , billboards , lighting and other objects .
 when the value of the driver is responsible for the ground and pay attention to work safety between vehicles.
the use of more than 25 m working height truck, in addition to set up safety signs and fence , the ground guardian hand pallet truck addition to the driver , but also set up a dedicated intensive care for 1-2 people .
during the operation , the hydraulic system if found abnormal noise or sudden leak oil , they should stop work until after inspection or repair , in order to continue working .
a hydraulic system failure , the arm can not move when the job should try to make the job hopper ( platform ) security staff on the evacuation , and inform professional service personnel.
the job is completed , the job hopper ( platform ) , the operating arm reset , put away the legs and disengaging the hydraulic pump , release the parking brake before starting lane .

In the side of the table liftstar hand pallet truck should be black and yellow safety signs

In the side of the table should be black and yellow safety signs , lift platform must be installed in table and floor entrances and exits from the obvious position " without permission , shall not enter ," the warning signs .
5.3 inspection of metal structures
5.3.1 Important weld
Important visual inspection of weld tables, lifting devices , bearing steel , etc., should be smooth, plump , oxide should be divisible , without visible weld , cracks, slag , undercut Hand lifter crater , burn and not welded through other defects, weld geometry and dimensions shall comply with design patterns .
5.3.2 Butt welds NDT
Bearing steel butt welds shall comply with the design requirements , butt weld length should be 20% of non-destructive testing.
Ray examination in accordance with GB/T3323-2005 " metal fusion welded joints radiography " provides radiographic quality level of not less than AB , qualified at Level Ⅱ; ultrasonic Electric lifters testing in accordance with GB/T11345-1989 " steel welds manual ultrasonic testing method and classification of testing results "provides test grade of not less than B grade, qualified at Level Ⅰ.
5.3.3 There should be no structural members overall instability , severe plastic deformation and cracks and other phenomena
5.3.4 fasteners should be complete and securely locked
5.4 protective fence
5.4.1 Ground Fence
Lift height is greater than or equal to the lifting platform should be set 2m fence , fence height of not less than 1.8m. Safe distance from the fence and the lifting platform is not less than the values ​​in Appendix

liftstar hand pallet truck If you use a high efficiency electric forklifts

If you use a high efficiency electric forklifts , and use more than 5 years of age , prone to failure. For example: Akira door frame , there are security risks forklift decreased stability ; consumable approach or reach the life span , such as forklifts appears sound ( door frame, drive axle, steering axle , the vehicle interior , etc. ) at work ; brakes bad, there are security risks ; motor abnormal noise motor bearings need to be replaced ; turned bad, there are security risks ; forklift operator components gap, look shabby and so on. This is due to the normal aging liftstar pallet truck  electrical parts , normal wear of the mechanical parts , resulting in decreased consolidated forklift , maintenance costs will increase year by year. Each time the emergency repair can only be part of the solution or the current problems. Plus vehicle perennial continuous use , consolidated declining, safety performance of the vehicle must also decreased. In this case, the safe use of liftstar must be most concerned about the problem of customers but also the most feared , overhaul work will be for customers to lift such concerns . Here to tell you about the benefits of electric forklift overhaul :

Enhanced through the use of a forklift overhaul security, ease of use can be re forklifts, avoid unnecessary loss of security risks.

After a major overhaul of the car , you can extend the life of the old 30% -50 %. Generally, cars overhaul to extend the life and then continue into use, cost control is very favorable .

Comprehensive overhaul to improve the situation by forklift , forklift increase life and reduce the frequency of purchase of the truck again , and reduce costs. By reducing truck warranty repair rate, thereby reducing the

liftstar hand pallet truck relevant agencies to ensure smooth operation

debug conditions: basic boom , boom elevation angle 50 °, lifting the working range under nominal weight to one meter height stop

2 debugging method : toggle joystick to boom up ( down ) position , a slight movement when heavy braking immediately . Continuous ups and downs of boom 10, the cumulative distance measuring horizontal movement of heavy objects , and calculate the average landings liftstar electric lift table per-action arm displacement . Its value should be consistent with the specified value, or should adjust brake reliability and sensitivity ( rope luffing mechanism ) or back pressure in the hydraulic circuit balancing valves and secondary safety valve set pressure ( hydraulic cylinder luffing )

3 Commissioning Requirements:   liftstar furniture movers   relevant agencies to ensure smooth operation , the action is accurate , no crawling , vibration, shock, and driving power increases and other abnormal phenomena : hoisting , slewing and luffing mechanism jog good performance

When liftstar hand pallet truck must be used correctly to ensure safety

When operating hydraulic transmission using high-altitude manned launch work is a species of contemporary art machinery and equipment . When a small crane aerial must be used correctly to ensure safety
1 , car drivers must hold a bus driving license.
2 , plus auxiliary gearbox liftstar Electric hydraulic stacker hydraulic pump must be off .
3, note bridges, tunnels headroom .
4 , the speed is generally not more than 30 km / h , the suburbs are not more than 40 km / h .
5 , the job hopper ( platform ) declined stranded personnel inside .
6 , parking location choice should be solid ground , vehicle inclination of not more than 3 °, and turn on the flashing warning .
7 , working height and liftstar palet jack Wind 6 and below the height of 10 meters or less suitable for the job ;
The following wind 5 can fit 11 to 20 meters below the height of the job ;
Wind 4 and below 21 to 30 m height suitable for the following operations.
8 , starting the pump , depress clutch , pull the hand brake , gearbox neutral gear , pulled the clutch rod hydraulic pump , the hydraulic pump is in working condition.
9 , the hydraulic pump running 2 to 5 minutes , before manipulating the handle of each action .
10 Aerial operations, should be trained and held responsible for the operating licenses for employment .
11 , the operator to concentrate , to prevent misuse and strict temperance after handling.
12 , first leg down , if necessary, in charge of decentralization wooden leg pad , make sure the vehicle is level.
13 , when the operating handle to steady , not rapid rapidly, this may cause the operating arm swing inertia is too large and accidents .

liftstar hand pallet truck monorail car for the installation of machinery and equipment

 Monorail production of high-quality production , advanced technology, safe, reliable, economical and practical. Monorail car safe to use, easy to maintain, extend the service life of more , work more efficiently .
Monorail compact structure, small installation size , high transmission efficiency, small hand pull. Can be used in the distortion path.
Monorail easy to adjust wheel spacing , for a variety of beam. Monorail car left and right wall hinge connection liftstar palet jack under the action of gravity, height can be adjusted , so that the four wheels by force .
Monorail widely used in factories , mines , docks , warehouses , construction sites , etc., monorail car for the installation of machinery and equipment , lifting goods occasions , especially liftstar hand jack for monorail job sites without power .
Monorail in use for some period , can inject lubricant according to the needs of the car , such as abnormal , please stop using it immediately and make a detailed examination in use

liftstar hand pallet truck especially after the new battery acid batteries out of the box

 especially after the new battery acid batteries out of the box , first wipe the surface , and then check the battery compartment , the battery cover is damaged in transit ; each part is neat , sealing agent for cracks . If you have questions should be resolved before liftstar scissor lift table the injection of the electrolyte .
the liquid supply hole of each battery cover ( ie, blocks ) spin , carefully check the vent is smooth , fine , if the application of wax closed through acupuncture . When the spin liquid supply hole cover , you can see the injection hole in the battery cover with a layer of soft closing film or a film , then the film may break or remove the soft rubber .
 has been configured liftstar electric lifts electrolyte , temperature controlled at 30 ℃ to inject the battery , the injection volume to the level above the long and short protection board 15-20mm is appropriate. After this time the internal battery occurred between the electrolyte and the chemical reaction produces a lot of heat plates must stand for 6-10 hours , until the temperature dropped to about 30 ℃, to start charging.
before you start charging , charging equipment must , rheostat and instruments , such as to conduct a comprehensive examination , if any failure or malfunction , should be excluded before charging .

liftstar hand pallet truck structure cantilever boom undulating drum by rotating the upper

Cantilever downs device
Boom box structure ( telescopic boom ) and the lattice structure boom ( boom patch ) , different configurations of the liftstar electric lift table method and apparatus of the boom undulating . Boom box structure , undulating cantilever mounted cylinder (hydraulic cylinders ) and telescopic boom allows for the ups and downs . Lattice structure cantilever boom undulating drum by rotating the upper and lower bridle brei dollar fluctuation watts through a pulley rope reel unwinding slightly undulating let the boom .
Cantilever down stop device ( cantilever back stop ) , but do not fall back to prevent the cantilever pillars , lattice structure cantilever installation. A cantilever liftstar scissor lift table frame and shock-absorbing springs telescopic enjoyed paddle bracket cantilever support structure , in case, for lifting ropes or hanging hook watt hate hate dedicated tile cutting the rope hanging goods falling , then use the cantilever reactionary Do not prevent the incitement . However , after the fall when the entire cantilever mass acceptance.

proof van parked or prolonged use of the frequency is too small

 when away from the car or parking should travel / retreat switch ( gear ) switch to the middle position shift and poke keys.
 week view a battery hydraulic hand truck electrolyte solution ( liquid level higher than the standard cold battery plates 10 ~ 15mm), prohibiting other liquid filling , it is necessary to raise distilled water.
 the controller , speed control , dashboard , DC converters , CD players , chargers prohibit water.
proof truck battery cable should Counter-balance Stacker always check whether the crack, whether loose pole , with or without mildew , etc., if required to remove the cable , loosen the nut pole , with a wire brush after a clean , dry cloth selection wipe, and then coated with Vaseline , anti-rust oil , or cause the vehicle circuit problems.
 proof van parked or prolonged use of the frequency is too small, must be placed after full power , the monthly charge the battery protection and protection in order to ensure normal supply of the vehicle power supply .
 security control , drinking and not driving, handling the car explosion Do not traveling at high speed when the slope , turn deceleration when traveling , to avoid the onset of accidents.

lattice structure cantilever

lattice structure cantilever ( patch cantilever )
Lattice boom crawler cranes, electric pallet trucks and other structures used in the patch for the continued boom and boom length between basic cantilever ( upper + lower boom boom ) can be changed. Additional cantilever method , bolts, inherited methods and needles have inritehed methods , now almost eliminated the combination use .
Hooks, front key-shaped spreader, hanging goods can be rotated in any direction . Dedicated tile hanging hook hook deviate hate ropes to prevent loss, stopping hook device installed. On the hook , the main burden of reuse volumes hook, single cable with a cargo crane hooks up Volume . Hook main roll , the number of required pulley mounted on the hook for lifting the rope is wound around the tiles slightly several building blocks p hook structure .

Cantilever retractable cable Luo - group or chain with something

Hydraulic cranes and other off-road truck cranes and boom , boom box- type structure strength . To use. Internal cantilever , hydraulic cylinders and cantilever retractable cable Luo - group or chain to have a combination of telescopic mechanism . Cantilever retractable cable Luo - group or chain with something , retractable Air lift table telescopic boom cylinder use , so that after the boom is telescopic . Typically , 2 ? 6 section telescopic hydraulic , 2 , 3 , 4 and sequential turn retractable telescopic manner scalable layers while simultaneously stretching mode . In addition, the simple way retractable pin mechanism sky . Simple sky pin mechanism , usually in different ways , a book each sliding inside a hydraulic cylinder cantilever boom fixing pin , while the telescopic boom so that the lock sequence method .
Most of the box Hand fixed lift table structure cantilever , the cantilever tip of the cantilever is extended. Grants can arm mounting . Auxiliary boom installed , orientation and subsidies if the mounting angle boom boom boom of less than 45 ° is necessary . Raise performance, and subsidies boom boom tilt angle mounting angle separately. Link cantilever equipped with a coarse stuff , subsidies cantilever mounting angle (tilt angle ) and the longitudinal direction of the cantilever within 5 ~ 45 ° hydraulic cylinders , etc. can be set freely .

the company received a lot of customer consultation calls

Recently , the company received a lot of customer consultation calls , many of which reflect the price of the issue , such as why our company's products offer those manually Taobao Shop Lifter Stacker price than a lot more expensive ? To this end, we each company's sales staff are also patiently explain , some of the more casually can say the main reason ! Here is why I am finishing the electric system on ebay Stacker price can be so cheap ?

1 , low- cost sales, stores Hand fixed lift table need not have , nor need service team . What is more significant , in fact, a glamorous Taobao is likely to be behind in the care of one or two people , there is no inventory , factories, warehouses, workshops , with only one computer only!

2, the price excluding tax , according to the market to count 17% of the ordinary , then remove this tax prices , the price of which can be a discount of twenty percent . Taobao many sellers are marked price excluding tax , requiring a VAT invoice need another 17% price increase

working parked there impurities

Failure Four: Rise and fall High Lifting stacker jack lever handle and the handle has a child by playing physical phenomena or top lifting slightly declined.

Reason:

1, working parked there impurities. Resorted to the oil valve closed lax ;

2 , high-pressure furniture movers and low-pressure oil region mooring areas have tiny perforations , the pressure oil seepage back ;

3 , Park cylinder mixed with air.

Remedy:

1 , to exclude impurities, cleaning or replacement pressure valve oil ;

2 , repair and replacement parts ;

3 , excluding air.

     This article from the Suzhou Industrial Equipment Sen Muda introduce you to more information please precautions to manual loading and unloading the truck when