Hand pallet trucks in the use of its bearer pallet fork insertion holes from the ability to drive the hydraulic system to achieve cargo tray lifting and lowering , pulling completed by human handling operations .
2014年7月15日星期二
the structure of the ministries hand pallet truck should be checked before use is normal
1, should be based on different environments, use different operating oil. When the ambient temperature is -5 ~ +45' C, please use the mirror synthetic oil, add the oil must be clean, so as not to affect the normal operation of the hydraulic system.
2, the structure of the ministries hand pallet truck should be checked before use is normal, all joints is loose.
3, the goods should be uniformly hand pallet truck distributed in the surface of the fork not tilt or a single crossed up, after the accident to prevent tipping or goods damaged parts.
4, after the operation, should be post lifter unloaded and placed in a low position of the car, will not allow heavy objects on a long fork.
5, during transport van, probably due to inversion causes the hydraulic system into the air, resulting in a slow hand pallet truck rod or pressure is less than the job requirements. Under no circumstances should the load, put the car in a low position, but pulled grapple, reciprocating several times to return to normal.
订阅:
博文评论 (Atom)
没有评论:
发表评论