Electricity needed to charge the battery Scissor Pallet Truck

Electric forklift battery directly affects the efficiency of electric forklifts, electric forklifts and therefore must be time to buy a good selection of batteries, battery pallet stackers  factors then what does?
1, Energy
Electricity needed to charge the battery, accounting for 13% of total lifetime costs.
2, the device
Including rack systems, battery charging device, charger wall bracket, cleaning station, environmental protection Scissor Pallet Truck equipment, accounting for about 1% of the total lifetime cost.
3, the battery
Initial acquisition cost of hand pallet truck batteries, accounting for 13% of the total battery life costs.
4, battery management labor
Watch battery is fully charged after fill electrolyte, charge the battery, keep the battery clean and prevent corrosion of the battery needs to labor costs, about 60% of the total life of the station.

Air scissor lift to prevent misuse and strict temperance after handling.first leg down

the operator to concentrate , to prevent misuse and strict temperance after handling.first leg down , if necessary, in charge of decentralization wooden leg pad , make sure the vehicle is level. when the operating handle to steady , not rapid rapidly, this may cause the operating arm swing inertia is too large and accidents .
must be strictly in accordance with the technical and operational requirements of the operating range of the device . the staff operating the bucket ( platform) to wear seatbelts .
lifting operations bucket ( platform ) , the upper and lower arms should alternate action to ensure that the job hopper ( platform ) in the best state radius increases , the operating arm is prohibited for other purposes .
the job , the operator should pay pallet stackers attention to the bucket ( platform ) , a safe distance from the arm with high and low voltage wires , telephone lines and buildings , trees , billboards , lighting and other objects .
 when the value of the driver is responsible for the ground and pay attention to work safety between vehicles.
the use of more than 25 m working height truck, in addition to set up safety signs and fence , the ground guardian hand pallet truck addition to the driver , but also set up a dedicated intensive care for 1-2 people .
during the operation , the hydraulic system if found abnormal noise or sudden leak oil , they should stop work until after inspection or repair , in order to continue working .
a hydraulic system failure , the arm can not move when the job should try to make the job hopper ( platform ) security staff on the evacuation , and inform professional service personnel.
the job is completed , the job hopper ( platform ) , the operating arm reset , put away the legs and disengaging the hydraulic pump , release the parking brake before starting lane .