hand pallet truck loading height shall not obstruct the driver's line of sight

1, manual forklift fork carrier when the goods shall be required to adjust the distance between the two forks so electric pallet jack that both forks load balancing not skewed, the goods shall be affixed by the backrest side, the weight of the fork carrier shall comply with the load center of the curve signs regulations.

2, loading height shall not obstruct the driver's line of sight.

3, during the process of loading and unloading cargo, you must use the brake forklift.

4, when the fork close to or withdrawal of the goods, the speed should be slow and steady, do not pay attention to the wheels rolling cargo, wood pad, to avoid being compacted matter overfly wounding.

5, with the goods when the goods cross on to take the fork should be as deep as possible into the fork load manual Platform Stackers following, but also pay attention to the fork or sharp objects can not be met other goods. After the minimum should be used to stabilize the mast tilting loads to avoid load sliding backwards. When lowering the load, make a small mast forward, in order to load and extract the fork placed.

6, prohibited goods and fork to take the high-speed collision with a fork head with a hard object.

7, forklift operation, prohibited personnel standing on the forks.

8, when the forklift fork to take the goods, prohibited personnel standing around the fork to avoid collapse of the goods wounding.

9, prohibit the use of fork lift personnel engaged in high places, in order to avoid falling from height accident.

10, are not allowed at the pier on the shores of the goods shipped directly to the fork.

11, prohibit the use of single fork operation.