liftstar hand pallet truck especially after the new battery acid batteries out of the box

 especially after the new battery acid batteries out of the box , first wipe the surface , and then check the battery compartment , the battery cover is damaged in transit ; each part is neat , sealing agent for cracks . If you have questions should be resolved before liftstar scissor lift table the injection of the electrolyte .
the liquid supply hole of each battery cover ( ie, blocks ) spin , carefully check the vent is smooth , fine , if the application of wax closed through acupuncture . When the spin liquid supply hole cover , you can see the injection hole in the battery cover with a layer of soft closing film or a film , then the film may break or remove the soft rubber .
 has been configured liftstar electric lifts electrolyte , temperature controlled at 30 ℃ to inject the battery , the injection volume to the level above the long and short protection board 15-20mm is appropriate. After this time the internal battery occurred between the electrolyte and the chemical reaction produces a lot of heat plates must stand for 6-10 hours , until the temperature dropped to about 30 ℃, to start charging.
before you start charging , charging equipment must , rheostat and instruments , such as to conduct a comprehensive examination , if any failure or malfunction , should be excluded before charging .