have joined various activities at the oil.

long life  scissor pallet truck  and easy replacement. Nylon roller entering and exiting the roller operator to reduce the force, and to protect the load wheels and forks; Descent Control valve with manual sealed pumps, steel fork performance profiles and structures, rise and fall , three position adjustable handle movement, scissor lift table have joined various activities at the oil.

able to absorb partial load, wear resistance

electric riding pallet jack the eradication of the shortcomings of the oil spill, the size of the piston rod chrome plated solid structure, with overload protection, decreased speed control valve with a whole piece, unlike the scattered parts, ease of maintenance, making the car more meet market  demand. Moving parts fitted with alloy hub, walkie reach stacker able to absorb partial load, wear resistance

The more obstacles truck

The more obstacles truck, walkie reach stacker mainly used for carrying away the obstacles handling operations across this truck can easily overcome obstacles without harm to the truck and the operation is simple; hand pallet trucks feature: pump sealed as a whole, the key components using the original German imports, with overload  Shop Lifter  protection

so it would be difficult to bear weight.

Generally a little better 3.0t car uses a 4mm   liftstar electric walkie pallet jack   steel plate, and the plate thickness difference plus some paint thickness are lower than 4mm, some even only reach 3mm, so jerry exchange price advantage for consumers is very pay responsibility. This car is easy to failure in subsequent use. In addition,Straddle stackers the manual hydraulic car plate thickness of 5.0t standard should also reach more than 8mm, so it would be difficult to bear weight.

so only a maximum load of 1.5 tons.

Hand pallet trucks National standard tray height generally 100mm, national standard hand pallet trucks under the minimum height of course, Shop Lifter so in this. General hydraulic truck into the lowest point when the height is 85mm, 75mm two kinds, of course, there are special low-level type of hand pallet trucks, minimum height even reach 35mm.   liftstar hand pallet trucks    Low price a little expensive to put the car in general, there are no special requirements do not recommend purchase. And low into 35mm manual handling car plate is relatively thin, so only a maximum load of 1.5 tons.

the platform is insufficient length can be extended to the desired position

According to different requirements can choose a different dynamic form (eg: three-phase AC power,  Hand pallet trucks single-phase AC power, DC power,Walkie stacker lift truck and internal combustion power, etc.), plus coupled with manual hydraulic devices, power or no power supply in place  liftstar electric walkie pallet jack   elevating work as usual, and add retractable platform, the platform is insufficient length can be extended to the desired position, thereby improving work efficiency. Is a modern tall buildings, the ideal equipment with product, is essential for the production of high-altitude safe and civilized.

Walkie stacker lift truck

Walkie stacker lift truck and then hydraulically elevated site, hold the goods, you can drag to move cargo, destination after arrival, the chassis with hydraulic landing, goods also will fall, you can easily pull out the van. Eliminating the need for manual handling of complex processes.Small volume hydraulic equipment, Electric order picker simple operation, easy to use. Ergonomic handle design work

Hand Pallet Truck is a small and convenient

hand pallet trucks is a small and convenient, flexible, carrying capacity, durable goods handling tools, commonly known as "earth ox." In addition to having the function of the van outside the consignment, in order to facilitate movements of goods, with a site between the vehicle and the wheel hydraulic device ，Post lift tables can easily be pushed under the cargo box car chassis

hydraulic hand truck

Electric forklift refers to electric forklift for the job，hydraulic hand truck Most of them are working for the battery.The battery is a battery,Role is limited battery power can be stored for use in the right place.The working principle is to put the battery chemical energy into electricity.walkie reach stacker Electric forklift battery is built batteries.

Stacker its simple structure

Stacker its simple structure, Drum Trucks flexible operation, fretting resistance, high-proof safety performance.Suitable for narrow passages and work in confined spaces，Is a high-bay warehouse, workshop loading and unloading pallets of the ideal equipment.Available for loading and unloading, scissor lift table stacking and handling operations.

You can control the size.

Fixed fork truck mounted platform, fixed forks, upper / middle telescopic fork connection between the sprockets, chains，Straddle stackers Higher output, without interruption of continuous stack.To improve product quality and avoid surface contamination and damage caused by manually stacking, Air lift table ensure that the surface quality of the material.The rapid replacement of products. You can control the size.

forklift truck

forklift truckForklift industrial handling vehicles,It refers to a member pallet cargo loading and unloading, stacking，Wheeled vehicle can carry short-distance transport operations，Commonly used in warehousing and transport large objects, usually fuel or battery-powered machine，Post lift tables It belongs to the material handling machinery

Defined reach truck

Mast reach trucks  or fork frame can be moved back and forth, which mast reach truck mast drive means when the job forks forward, extending beyond the front wheel fork or take down cargo, cargo when walking fork with the goods back, so that the center of gravity of goods within the support surface; the fork reach truck means shelves before driving outside front wheel forks to move jobs, drive fork forks retracted when walking into the support plane. Reach truck with two leg reach, higher leg, the front legs there are two wheels, legs role is to ensure stability when the truck load. Compared with the straddle forklift, front larger, higher legs, the legs when the job can not be inserted at the bottom of the goods, and the door frame can be moved with the entire lifting mechanism along the tracks inside the leg, so the goods cross on After taking a cargo lift height can be slightly retracted, ensure the stability of the truck running. Reach truck and straddle forklift as the center of gravity of all goods falls within the support plane of the vehicle, and therefore good stability . Suitable for workshop, warehouse operations. Drum Trucks from the smaller weight, using the motor to drive.

Use the manual how to properly use hydraulic jacks

1forklift jacks the use of first quick connector and the top butt manual hydraulic pump, and then choose the right location, will put the oil on the screw pump tightened to work. Purports to piston rod drop, the manual hand pump counterclockwise slightly loosen the wheel, cylinder unloading, the piston rod that is gradually declining. Otherwise, the excessive rate of decline will be dangerous.
2, manual hydraulic jack hydraulic retraction, lifting finished, you can quickly removed, but not to pull the hose connected to a Hand pallet jacks.
3, do not exceed the rated stroke of users, in order to avoid damage to the hydraulic jacks.
4, using the process of hydraulic jacks severe vibration should be avoided.
5, suitable for the acid-base, workplace corrosive gases.
6, the user to regularly check and maintain based on usage.

How to properly use the manual hydraulic jacks

1, each part must be checked before use is normal.2, should be used in strict compliance with the provisions of the main parameters, avoid ultra-overload, otherwise when the lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.3, such as the lack of a manual fuel pump body, need to first pump should be added N32 # hydraulic oil to work sufficiently filtered.4. Refer to the electric pump electric pump Operating Instructions.5, the weight center of gravity to choose moderate, reasonable choice of electric jack focal point, to pad the bottom level, taking into account the hard and soft ground conditions, whether the timber liner tough, place is stable, so as not to load subsidence or tilt.6, manual Hand pallet jacks lifting heavy objects, it should be timely and firmly supports the weight support to prohibit the manual Electric Hand Pallet Jacks used as a support. For a long time support weight please use the self-locking jack YZL7, in addition to ultra-high pressure jack should be correctly placed outside, you should use multiple top diverter valve, and each electric jack load should be balanced to keep the lifting speed synchronization. You must also consider the case of uneven ground by the weight of possible subsidence, prevent a tilt lifting heavy objects and dangerous.

History of the jack

hand jack originated in the early 20th century Britain, the United States, Germany and other countries, in the progressive development of the technology matures. Because of its anti-corrosion, high temperature, high strength, fine surface, unmatched good performance 100 percent recyclable, etc., are widely used in construction, transportation, energy, petrochemicals, environmental protection, urban landscape, health care, food and other fields, and gradually It accepted by people, but also more and more into the daily lives of ordinary people.
Early in the 1940s, horizontal jack has already begun abroad vehicle maintenance department use, but because the reasons for the design and use of its larger size, the lower the carrying capacity. Later, with the increase in technology and the development of society itself jack demand in the early 1990s, the vast majority of foreign customers has been to replace the vertical horizontal jack jack, in the late 1990s developed a pneumatic jack and portable Hand pallet jacks and other new jack exhibition.

How to hand pallet trucks exhaust air system

hand pallet trucks does not rise up, make workers teach you exclude air hydraulic system approach.
Manual hydraulic car factory warehouse shop is the most common handling tools, because its shape is simple, powerful and beautiful name "to the cattle." But this simple device is also often occur one way or another problems, such as slow rise, slow decline. Or simply lift it up.
Quick lift Hand Pallet TruckDoes not rise up, many people think it is not broken? In fact is not so, a lot of time just inside the manual hydraulic pump car air, leading when the hydraulic lift does not rise or slow! This time simply arranged for air can make manual handling car intact. .

Stacker according to the operating environment select electric

If the cargo handling companies or warehouse environment needed for environmental noise is required, when selecting the model and configuration be considered. If it is in cold storage or in explosion-proof requirements of the environment, Electric hydraulic stacker configuration should be cold or explosion-proof type. Stacker process carefully examine job, you need to go through the place, it is envisaged the possible problems, such as when a storage door height of Stacker whether it will affect; Straddle stackersand out of the elevator, the height and the impact on stacker bearer; when upstairs job, whether the floor bearing the corresponding requirements, and finally considering all the factors determining the final electric stacker models and technical specifications. Welcome to call for more assistance.

Lida Hand Pallet Truck Features

Van also called handling small tanks, heavy movement of devices, to cattle. liftstar hand pallet truck used for handling all types of mechanical machines or other heavy objects that can fit the jack, hand destroyed the top and other lifting gear used together, reduce labor intensity and improve efficiency.1, choose heavy mast column steel roll forming. Make the frame stronger, more secure, mobile and sensitive, convenient operation.2, hand pallet trucks tanks use high-precision grinding tubes, imported oil seals, integrated spool, convenient disassemble and repair. Foot method, promoted the circulation speed, greatly improving security.3, hand pallet trucks choice of leading spray technology, the appearance of progress and added commodities hand pallet truck durability.4, hand pallet trucks is a pollution-free hand pallet truck, transporting sensitive, sensitive operation, small turning radius.5, hand pallet trucks are suitable production plant, production workshops, storage, railway stations, docks, airports, etc., especially suitable for the needs of the fire and explosion sites use, such as printing workshop, all kinds of oil storage, chemical warehouses and other places.6, hand pallet trucks depicted in transit, not only can reduce bump, scratch and so on, but cut the workload and stacking orientation, greatly improving the work efficiency.

Scissor lift Use

Air scissor liftStorey building used for transporting goods between special hydraulic lifts, major products work with various inter-layer transport goods up and down; between three-dimensional garage and underground garage storey car lift and so on. Products Hydraulic System Settings fall protection, overload protection device, on each floor and lift the work surface can be set to operate buttons, lift starmulti-point control. Solid structure between products, carrying capacity, stable lifting, easy installation and maintenance, is economical and practical low-floor elevator ideal alternative cargo transportation equipment. Depending on the installation environment and application requirements lifts choose different optional configuration, you can achieve better results.

What is electro-hydraulic stacker

Electric hydraulic stacker motor as the driving force, is an industrial handling vehicle battery energy, refers to a member for loading and unloading cargo tray, piled high, a variety of wheeled transport vehicles stacking and short-distance transport operations.
International Organization for Standardization ISO / TC110 called industrial vehicles. Electric forklift trucks include: all-electric forklift trucks, semi-electric stacker, reach stacker trucks, reach all-electric forklift trucks, reach stackers,hydraulic hand truck pedestrian counterbalanced stacker. Electric forklift trucks are widely used in factory workshops, warehouses, distribution centers and distribution centers, ports, railway stations, airports, freight yard, and access to the cabin, loading and unloading, cargo handling operations inside pallets and containers. A pallet transport, container transport essential equipment.

Scissor lift definition and classification

scissor lift table are widely used aerial work equipment. Its scissor mechanical structure, so there is elevator lifting high stability, large platform and a higher carrying capacity, so that a greater range of operations at high altitude, and for many people simultaneously. It enables high-altitude operations more efficient, safer and more secure.
Air scissor liftt is divided into: fixed scissor lifts, mobile scissor lift, self scissor lifts, scissor lift vehicle, artificial traction scissor lifts, scissor lift truck dedicated.

Air scissor lift platform Principle

Air scissor lift platform products in accordance with the work divided into Boom Air scissor lift, hydraulic scissors lifts, Mast pole Air scissor lift, hydraulic lift arm. Air scissor lift are folding arm lifts (lifting platform), scissor lifts (lifting platform) replacement. It can be widely used in railway stations, docks, airports, hotels, telecommunications, municipal gardens, grain storage, cleaning companies, public building facade decoration, decoration or power system installation and maintenance and so on. The elevator has a light weight, self-propelled, electric start, self-leg, simple operation, large work surface, especially aerial work to cross barriers and so on.
1,Air lift table can be divided into: four mobile, two traction, convertible cars, car batteries, Miscellaneous self-propelled, lifting height ranging from 4-18 meters. This series is divided into 0.1 to 0.8 tons load, can also be customized according to user requirements, the maximum load of up to 10 tons.
2, Post lift tables is widely used in industrial and mining plant maintenance, municipal construction, hotel decoration, reliable quality, and improve performance.
3, the user can choose according to their use of power mode and configuration

Use Air scissor lift

Air scissor lift are widely used in automobiles, containers, mold manufacturing, wood processing, chemical filling and other industrial enterprises and production lines, to meet the different needs of working height of High Lifting stacker, but can be equipped with various types of table form (such as ball, roller, wheel , turning, tilting, telescopic), with a variety of control (sub-action, interaction, explosion-proof), with a lifting smooth and accurate, frequent start, carrying capacity and other characteristics, an effective solution to various types of industrial enterprises in difficulty lifting operation, so that the production job easier.
Fixed lift table platform is drive by hydraulic fluid pressure in order to achieve the lifting of the function, its scissor mechanical structure, so there is lift lifting high stability, large platform and a higher carrying capacity, making high-altitude operations range larger, and for many people simultaneously. It enables high-altitude operations more efficient, safer and more secure.

Air scissor lift characteristics and working principle

A lift device lifts the running gear, hydraulic mechanism, electric control mechanism, supporting institutions. A certain pressure of hydraulic hand truck oil from the vane pump, the filter, explosion-proof solenoid valve, throttle valve, check valve, balance valve into the lower end of the hydraulic cylinder, the upward movement of the piston cylinder, improve weight matter, the upper end of the hydraulic hand truck cylinder return oil through flameproof solenoid valve back to the tank, which is adjusted by the rated pressure relief valve, pressure gauge watching the pressure gauge readings.

Liftstar Material Handling Equipment Company

Forklift Battery Safety ten points

forklift jacks traction batteries, also known as liftstar forklift batteries, as forklift drivers, be sure to follow the proper codes of practice, safe use, keeping in mind the following ten basic precautions:
1. The battery will produce hydrogen, it could cause an explosion, smoking is strictly prohibited in the vicinity of the battery, and forbids any flame or sparks. During storage or charging the battery in a well ventilated place must, but do not exhaust the mouth, avoid mist causing corrosion.
2. The battery fluid containing corrosive liquid may cause severe burns, the need to avoid contact with skin, eyes or clothing, if unfortunate accident occurs, wash immediately with plenty of water and seek medical advice fast.
3. When the battery is inspected or serviced, please use rubber gloves to avoid electrical shock.
The battery surface must be kept clean or joints. Dust, and other impurities must be removed with a damp cloth clean, otherwise it will drain, and even cause fires.
5. Clean the battery, be sure to use a damp cloth, do not use a dry cloth.
Do not use tools connected between the positive and negative electrodes 6. battery.
7. Do not charge the electrolyte temperature exceeds 50 degrees Celsius, to avoid electrolyte overflow damage, with particular attention to the summer day.
8. battery before pulling the plug, in order to avoid sparks, be sure to turn off the key switch and the charger switches the truck.
9. Do electrolyte surface below the minimum, otherwise the battery is easy to heat, easy to burn.
10. Keep away from children.

The rapid growth of Chinese forklift ownership, while the homogeneous product price war intensified.

The first is the overall market China forklift, at the end of 2013, a net increase of holdings in 2013 amounted to about 20 million units, a conservative estimate of the domestic truck reserve amounted to about 1.68 million, at least in the next few years, until 2018, Along with China's gross domestic product (GDP) is expected to continue to grow at an average rate of around 8 percent, the market demand for trucks will also rise, coupled with China's future will enter the degree of aging population and increasing industrial automation, Demand for material handling tools still sustainable growth. According to China hand jack boldly predicted that the annual average growth rate will likely reach 10 percent by 2018 to maintain the truck in China amounted to about 300 million units. In 2009, China replaced the United States as the world's largest industrial vehicle manufacturer and consumer, coupled with the future growth rate of Chinese liftstar forklift market will have a direct impact on a number of machine manufacturers, parts suppliers and the whole truck markets around the world . New car prices will continue to decline, OEMs can reduce the annual cost will be about 8% increase in sales will not offset the impact of lower prices, on the other hand, the reality from the product on the market, the rapid spread of technology, leading to products are more and more homogeneous, forcing forklift manufacturing enterprises to actively seek new breakthrough to create new types of vehicles, opening up new market segments, conquer new market ground as soon as possible to obtain a new lead.

Stacker development shows five kinds of trend

Our Stacker industry has already experienced 10 years of rapid growth, but at present, China forklift trucks only in the international market, but also in the days of the market, the development potential is very large, at the same time, but the domestic market is becoming increasingly Stacker increased foreign warehousing giant has occupied the high-end market, and began to focus on the low-end forklift trucks market started late in China's logistics, logistics equipment potential, future demand will show walkie reach stacker grow exponentially, face Stacker market, our domestic business that is faced with opportunities, but also faces enormous challenges.
One of the trends: a systematic
Stacker is a systematic development of an important trend, foreign well-known large companies to gradually achieve its product series, which formed a Straddle stackers/ stacking of core functions, from small to large different styles and different types of forklift car, meanwhile, product replacement cycle significantly shortened.
The second trend: professional
Automatic storage center, the establishment of large-scale logistics distribution center, to stimulate the market demand for handling high stack machine, while domestic Stacker presents flourishing situation. Fighting for lower production costs and marketing costs, improve service quality, net sales began to enter the more traditional mechanical industry, forklift trucks from specialized industry-hing a good atmosphere.
Trend three: intelligence
Stacker market will enter the era of science and technology athletics, advanced information processing technology, identification technology has been applied to more cars piled high research and development process, the future will be to achieve information processing functions to achieve Stacker perfect combination of work and Computers truly efficient logistics goals.
Trend 4: energy saving, environmental protection
Domestic forklift trucks to power the classification can be divided into internal combustion forklifts and electric forklifts, internal combustion forklifts powered by internal combustion engine, its strong power, wide application, the disadvantage is the larger emissions and noise pollution, harmful to human health, energy environmental protection will be one of the future topics, the main consideration manpower from reducing engine emissions and improve the efficiency of hydraulic systems and vibration, noise, etc., to be sure, less emissions, less noise Stacker will occupy the future of the entire Stacker market, all-electric stacker, natural gas forklift trucks, LPG forklift trucks and other environmental protection will become the future Stacker Stacker theme.
Trend 5: safety, comfort
Security mainly refers to the use of the process must be safe, but also easy to handle, comfortable, this is the use of mechanical humane future requirements, safety is the most basic requirement of complete stacking operations.

Overview of manual hydraulic platform car

Manual hydraulic platform car, is a small lift machinery, mainly for small range of movements, articles extract, placed, also used to carry small valuables. The product looks generous, the structure is firm, the stability is safe, the internal performance and service life have reached the advanced level of the same equipment. At present, the main market is hydraulic driven lift,  hand pallet trucks due to the size of the compact, mobile is widely used in logistics transportation, warehouse management, library, supermarkets, and ordinary small equipment manufacturing industry.

Manual hydraulic platform vehicle use made of high strength steel and, reasonable structure design, smooth and reliable safety, built in safety valve, fully sealed oil cylinder, manual control hydraulic lifting system, the operation is convenient and simple. Equipped with nylon steering wheel to save the operator's physical strength,  Air scissor lift and can protect the load wheel and the pallet truck wheel. Unique hydraulic pump design, the pump is simple for assembly line loading and unloading operation to maintain an ideal height and design; coupled with unique ergonomic design, so that the operator comfortable operation.

hand pallet truck maintenance procedure

• purpose

Regulate the maintenance content and period of  hand pallet truck and ensure the normal operation of the equipment..

• Range

Application of manual hydraulic vehicle maintenance for workshop management.

• Responsibility

The operating personnel, in strict accordance with the rules of maintenance personnel to assist mechanic equipment.
The maintenance personnel, in strict accordance with the procedures for the maintenance and repair of equipment.
Supervisor of the workshop, responsible for the implementation of the regulations..

• Content

Periodic maintenance method, periodic maintenance work including cleaning, fastening,  hydraulic hand truck  inspection and replacement and other measures.

Maintenance cycle, maintenance cycle in the periodic maintenance of the specific cycle based on.

Maintenance responsibility, the periodicity of the equipment maintenance by operators and maintenance personnel to complete, the operating personnel assist machine repair personnel complete cleaning, inspection,  Air lift table ,lubrication and replacement of parts and equipment.

The application of the heavy load truck and its maintenance method

Carrying vehicle namely the freight transportation equipment which transports the goods.

Drag when empty, Air scissor lift ,let the car free movement of hydraulic release ban.

Manual pallet trucks in use will be the load of the fork into the tray hole, by human driven hydraulic system to realize the pallet cargo lift and drop, by human pull complete handling operations.

It is the pallet transport tool in the most simple, the most effective, the most common loading and unloading, hand jack , handling tools.

Hand pallet truck use notice

Hydraulic truck is a kind of high lift loading and short distance transportation vehicle, because no spark and electromagnetic field. Especially suitable for vehicle handling and workshop, hand pallet trucks ，warehouse, dock, station, yard, flammable, explosive and fire forbidden goods handling and transportation.

1.People are not allowed to stand in the hydraulic car, not on.

2.The fluid pressure only hand or hands, walkie reach stacker ，the absolute prohibition of tread on the other foot support force hydraulic car speed.

3.The fluid pressure without brake mechanism, the operator must control the speed downhill.

4.The fluid pressure transportation smoke box, Post lifter ，hydraulic car increase tray height is not too high, too high to rollover smoke box.

The brief history of air scissor lift

Lift [elevator] should be defined as, Air scissor lift in the upper and lower vertical channels carried or cargo lifting platform or semi closed platform lifting machinery and equipment or device.

They used equipment, operated by platform and a whole motor, cable and other auxiliary equipment. Electric Hand Pallet Jacks

Similar to lift the earliest can be traced back to ancient Chinese and European countries,then have to tackle tools such as vertical transport of people and goods. Modern elevator is the product of the invention of the steam engine in nineteenth Century. In 1845, Post lifter ,the first hydraulic lift was born, when the use of liquid water.

In 1853, American Elisha Otis - Elisha Otis invented automatic safety device, greatly improves the cable lifter safety.

In March 23, 1857, lift mover , New York American a five storey shop installed the first use of Otis safety device for passenger lifts. Since then, the use of the elevator has been widely accepted and rapid development. The first elevator was driven by a steam engine, so the placement of the building must be equipped with a boiler room.

In 1880, the German Siemens method using a power lifter, and be worthy of the name "lift" appear formally. Since then, the use of the elevator has been widely accepted and rapid development.

Liftstar Hand Pallet Truck Series

A .CBY / CBYE hand pallet truck
1. use conditions
Horizontal transportation
2 Features:
- According ergonomically designed tiller, simple, safe and flexible;
- High-strength body, to meet a variety of needs, adaptability;
- Advanced hydraulic system with a light load quickly upgrade function, high efficiency;
- The front wheels are driving wheels and dual carrier polyurethane, good wear resistance;
- The front fork specially designed guide wheel, with the import of good;
- All bearings are provided with lubrication units, hydraulic systems and the bearing is Electric hydraulic stacker

completely maintenance-free;
- German imports of seal elements: quality, reliability, long life, good sealing effect;
- Swing rear structure: to ensure both sides of the rear wheels could fall at the same time,Quick lift Hand Pallet Truck , the contact is good, avoid the fuel tank to withstand side load;
- Provide different fork length / width;
- Provide nylon / rubber wheel for use in different conditions;
- Optional parking brake: Hand brake / foot brake;
- Body color available according to customer requirements.
3 The main technical parameters, walkie reach stacker
Model CBYE
Load Kg 2000/2500/3000/5000
Fork width mm 520/550/685
Fork length Mm / inch 1100/1220 (43.3 "/45.3")
Weight Kg 78 ~ 95
Quantity / 20 'pus 144/180

Features of all-electric Stacker

1, power walking, electric lift. liftstar electric stacker
2, imported steel door frame or custom steel, so that the body never deformation, durable.
3, imported American Curtis electric control system, responsive, safe operation.
4, Italy imports drive assembly, powerful.
5, the combination of high-capacity traction battery, the continuous work longer hours. Electric lifters
6, the smart charger ensures the battery life.

Hand pallet truck caring，help people with disabilities of skills training

March 13 morning, the staff of a truck company with two hand pallet truck, Taicang City, hand pallet trucks people came to the training base, the two hydraulic hand pallet truck donated to students with disabilities skills training bases to to improve the strength and efficiency of their work, helping them to achieve as soon as possible by learning job skills to integrate into the social life of dreams. By chance, Amelie Taicang European Association Jungheinrich to Mr. Ou Yalei introduce Taicang China CEO Association of Europe and Germany are preparing Taicang Perfect Industrial Co., Ltd., the company is positioned as a non-profit facility with disabilities.

Taicang Europe invested Enterprises Association, more than 50 European companies as the basis to create a model factory with disabilities,hydraulic hand truck through the introduction of theory plus practice for young people with disabilities Dual System of education and training, to further enhance the competitiveness of the employment of people with disabilities. Mr. Ou Yalei think this charity is very meaningful, and when he learned that the project has been the training base of the first students,Quick lift Hand Pallet Truck , but teaching resources and limited working equipment after they immediately decided to donate two hydraulic hand pallet truck I hope through action to actually join this charity project to help those with disabilities to hold up their hopes for the future life.

Hydraulic control system lift

The elevator is a kind of lifting performance is good, suitable for a wide range of goods lifting mechanism, can be used in the production line of height difference between delivery material equipment, on-line, offline, lifting parts assembly parts, large hangar feeding, feeding, storage handling and other places, the use of the fork vehicles and facilities,Air scissor lift as well as goods fast loading and unloading. It adopts full hydraulic pressure control system, the hydraulic system has the following features: (1) in the same volume, the hydraulic device can produce more power than any other device, under the same power,hydraulic hand truck the hydraulic device has the advantages of small volume, light weight, compact structure, high power density, volume and weight of hydraulic motor only the same power motor 12%.

Air scissor lift Active Protection technology design and passive means of combining explosion

General domestic design electric forklift explosion commonly used technique is to take flameproof, intrinsically safe, increased safety and other means to prevent or control the liftstar electric lift table‍ explosion occurred in an explosion after explosion in vivo, but also in the circuit design simple as possible, reducing line and reduce the spark control point, for the aging, insulation performance by artificial periodic inspection, greater security risks.

The so-called Active Protection technology is in the whole circuit design with advanced sensing, short circuit protection, insulation monitors and other electronic components and intelligent control system combines the technical parameters set up by the program proof, so you can proof the performance of the machine automatic control to avoid the security risks caused by human activity. And can heat up, down and the secondary current limiting thermal Electric lifters‍ control technology, you can control the operation of the vehicle, to work longer hours.

Electric hydraulic stacker l configuration of advanced electronic power steering system EPS, lightweight, low noise;

Advantages

l drive unit with a durable, reliable in the middle of the floating mechanism;

l unique booster cylinder configuration, ensuring liftstar hand jack‍ stronger adhesion ground vehicles, effectively prevent tire slip;

l The AC drive motor, brushless, maintenance-free, reduce maintenance costs;

l Configure reliable American Curtis controller with variable speed and a number of automatic protection function;

l standard lifting power limit function, reducing energy waste and extend the life of the hydraulic system and related components;

l steering position using non-contact proximity switch, reliable quality, long life;

l Optional automatic corner deceleration devices, to Air lift table‍ further enhance the safety and reliability of the vehicle;

l Optional single support wheels, equipped with guide wheels and pulleys, making out empty tray smoother and more efficient.‍

Air scissor lift Features

l EPS electric power steering system to manipulate light, low energy consumption, quiet and efficient, with automatic shutdown memory, boot automatically reset function, Electric lifters‍ completely out of the handle and drive systems, can effectively prevent the phenomenon of uneven ground handle thugs drive thrashing caused;

l drive unit with intermediate floating bodies to ensure that the focus has always been the most stable part of the triangle institutions significantly improve the stability of the vehicle, and effective shock absorption, protecting the vehicle structure;

l booster cylinder vehicle running and lifting heavy load cargo, in order to increase the adhesion of the drive unit to prevent wheel slip;

l drive system having regenerative braking, deceleration and recovering energy generated during braking, the extension of the vehicle operating time;

l standard lifting power limit function, reducing energy waste and extend the life of the hydraulic system and related components;

l high wear-resistant polyurethane tires, good elasticity, strong bearing capacity;

l steering position using non-contact proximity switch, electric platform stacker‍ reliable quality, long life;

l using folding, non-slip pedals, with a spring damping system to ensure the operation of the operator comfort.‍

liftstar hand pallet truck Truck also known as ground beef

Truck also known as ground beef, is a short distance internal transport, handling and stacking of goods trackless vehicles. This vehicle is suitable for railway stations, docks, electric lift table‍ airports, warehouses, construction sites, garages, which are handling, local handling.

According to the structure and use of transport vehicles into truck, tractor and lifting three categories of vehicles, lifting the vehicle can also be divided into forklift trucks, side forklifts, reach trucks, straddle trucks, straddle, tray transport vehicles.

Handling vehicle main features are:

A) paid directly comparable handling more than 25% liftstar pallet truck‍ reduction in manual handling.

2) increase the cargo handling unit, saving transportation time.

3) reduce the damage to transport goods, improve the success rate of the product.

4) increase the height of the heap of goods, improve the utilization of stacking space.

5) reduce labor intensity and improve working conditions.

6) good mobility, performance diversification, palle stackers‍ reduce other handling equipment, reduce overall transportation infrastructure investment.