liftstar hand pallet truck Truck also known as ground beef

Truck also known as ground beef, is a short distance internal transport, handling and stacking of goods trackless vehicles. This vehicle is suitable for railway stations, docks, electric lift table‍ airports, warehouses, construction sites, garages, which are handling, local handling.

According to the structure and use of transport vehicles into truck, tractor and lifting three categories of vehicles, lifting the vehicle can also be divided into forklift trucks, side forklifts, reach trucks, straddle trucks, straddle, tray transport vehicles.

Handling vehicle main features are:

A) paid directly comparable handling more than 25% liftstar pallet truck‍ reduction in manual handling.

2) increase the cargo handling unit, saving transportation time.

3) reduce the damage to transport goods, improve the success rate of the product.

4) increase the height of the heap of goods, improve the utilization of stacking space.

5) reduce labor intensity and improve working conditions.

6) good mobility, performance diversification, palle stackers‍ reduce other handling equipment, reduce overall transportation infrastructure investment.

Air scissor lift Six emergency treatment

     An electrolyte splashed on skin: Flush with plenty of water

     2, electrolyte splashed in the eyes: Electric Hand Pallet Jacks‍ rinse with plenty of water, and then receive professional medical treatment

     3, the electrolyte spilled into clothes: immediately took off his clothes, rinse with water and then rinse with a weak alkaline soap.

     4, electrolyte leakage: the electrolyte leakage to the outside immediately with lime, palle stackers‍ strong carbonated soda or carbonated soda to neutralize etc., and rinse with plenty of water.

liftstar hand pallet truck Electric Stacker repair and maintenance mainly the following considerations

Electric Stacker repair and maintenance mainly the following considerations: the battery charging and maintenance, repair and maintenance of the battery, the mechanical part of the repair and maintenance

Battery charging and maintenance:

The main parameters of the vehicle pallet jacks‍ charger provides as follows:

Input: AC 220V / 50HZ

Output: Voltage: DC24V

Current: DC0 ~ 30A

Before charging off batteries and control part of the circuit (press the red emergency stop button), and then the charger output plug-in access to the car charging jack, plug the charger plug in the AC 220V, 50HZ power outlet, at the end of the charge , first unplug the AC power cord. Plug the plug of the order must be strictly adhered to. See detailed instructions manual charger.

  Note:

At least once a week to check the electrolyte palle stackers‍ fluid level.

Electrolyte supplements should be carried out after the end of charge, since the electrolyte during charging swell. As the liquid level is too low, the need for more than one hour after the end of charge in order to add distilled water (or deionized water).

Battery surface should be kept clean and dry, because dirt and moisture may cause leakage and lead to decreased battery capacity. Available electrolyte leakage soda solution or dilute ammonia and then rinse with water, please.

Line column joints to fully tighten the oil and coated with acid to avoid sulfide layer. Sulfide layer reduce the contact surface resulting in a considerable voltage drop objective.

Censorship:

Detect the battery state of charge every day acid hydrometer (electro-hydraulic hydrometer). It should not discharge the battery to the gravity of less than 1.16. (Ninety percent discharge)

The proportion at 30 ℃ Electric Hand Pallet Jacks‍ charging status

1.260 ~ 1.280 100%

1.230 ~ 1.250 75%

1.200 ~ 1.220 50%

1.170 ~ 1.190 25%

1.140 ~ 1160 has discharged 90%‍